Mini Solar Panel 9V 2 Watt 2 W Solar Cells
₵120.00
In StockThis solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
8 in stock
Description
Solar panels have become a favoured and eco-friendly option for various electronic projects. Portable and lightweight solar cells can turn sunlight into electricity, providing a green and easily accessible energy source for outdoor projects. This larger 9V 2-watt solar panel is ideal for medium-sized projects and solar-powered applications. These small panels can be used like tiles to form larger arrays in situations where a larger panel may not fit or conform to uneven surfaces or structures.
Each solar panel generates roughly 220mA @ 9V and measures 115 x 115mm. The outer surface is a hard plastic coating while the backing is a hard PCB material. Wires can be soldered to the back of the panel with ease!
Features
- Output Voltage: 9V
- Dimensions: 115 x 115mm
- Output Rating: 2 Watts
- Output Current: ~220mA
- Thickness: 2.75mm
Related products
-
Brand Manufacturer CHINA Country of Origin China Colour black Number of Memory Sticks 1 Item Weight 191 g Package Dimensions 21.79 x 11.61 x 6 cm; 191 g Item part number GJHYGHJ2 Are batteries included? No ₵75.00 -
- High-Quality Motor Driver: The HANPOSE HPD970 Motor Driver Board is a high-quality product designed for 3D printer enthusiasts and professionals, ensuring reliable automation control and precise motor operation.
- Wide Voltage Compatibility: This motor driver board operates within a wide voltage range of 24-110VDC, catering to various user preferences, including the user’s input of a specific voltage requirement.
- Certified and Reliable: The product is certified with 3C, ensuring compliance with industry standards and guaranteeing a safe and efficient operation.
- Compatibility with Nema 23 Stepper Motors: The HANPOSE HPD970 Motor Driver Board is specifically designed for use with Nema 23 stepper motors, making it an ideal choice for users working with this type of motor, such as the user who requires a driver for their Nema 23 stepper motor.
₵175.00 -
Solar panels are a clean and ecological source of electricity. Obtaining this energy, however, poses several challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency
The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers and also to store energy produced excessively for later use
The SCC-30A-PWM-LCD solar charge controller allows you to connect panels both in series and in parallel – remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.
₵210.00 -
The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.
₵80.00 -
This Sonoff Dual is a 1-channel WiFi wireless switch that can connect and control one home appliance and electrical device. this device Enables remote control of home appliances through the mobile application. the Sonoff Basic switch’s advantages such as easy installation and operation, quick WiFi access, and APP remote control.
₵180.00 -
About this item
- EXCEPTIONAL PRINT QUALITY: Achieve high-resolution prints with a precision nozzle that ensures detailed and smooth models with printing accuracy up to ±0.1mm, ideal for prototyping and sample creation.
- LARGE BUILD VOLUME: Offers a generous build space of 220 x 220 x 250 mm, perfect for creating medium-sized prototypes, small batches, or detailed parts for molding and sample applications.
- RAPID HEATING BUILD PLATE: The heated bed reaches operating temperatures (up to 110°C) in just five minutes, ensuring strong adhesion and reducing material warping, making it suitable for various filament types.
- RESUME PRINTING FUNCTION: Safeguard your printing projects with power recovery mode that resumes printing from the last recorded position after a power interruption, reducing the risk of print failure.
- ADVANCED EXTRUDER TECHNOLOGY: The upgraded extruder minimizes the risk of clogging and ensures consistent filament extrusion, enhancing the overall print quality and making it ideal for mold sample printing.
Original price was: ₵5,990.00.₵5,500.00Current price is: ₵5,500.00.
Reviews
There are no reviews yet.