Out Of Stock
Mini Solar Panel 9V 2 Watt 2 W Solar Cells
₵120.00
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
Out of stock
Description
Solar panels have become a favoured and eco-friendly option for various electronic projects. Portable and lightweight solar cells can turn sunlight into electricity, providing a green and easily accessible energy source for outdoor projects. This larger 9V 2-watt solar panel is ideal for medium-sized projects and solar-powered applications. These small panels can be used like tiles to form larger arrays in situations where a larger panel may not fit or conform to uneven surfaces or structures.
Each solar panel generates roughly 220mA @ 9V and measures 115 x 115mm. The outer surface is a hard plastic coating while the backing is a hard PCB material. Wires can be soldered to the back of the panel with ease!
Features
- Output Voltage: 9V
- Dimensions: 115 x 115mm
- Output Rating: 2 Watts
- Output Current: ~220mA
- Thickness: 2.75mm
Related products
-
This turbidity sensor module is a specialized electronic monitoring device engineered for compatibility with various microcontroller platforms, including Arduino, Raspberry Pi, PIC, ARM, and AVR.
The Arduino Turbidity Sensor is a highly effective tool for assessing and verifying water quality through the measurement of turbidity. This sensor provides results via both digital and analog signals, which can be obtained through the designated pins on the accompanying electronic module. This functionality allows for accurate monitoring of water clarity, making it an essential instrument in various environmental applications.
₵145.00 -
The High-Quality Adjustable Temperature Straight Plug Soldering Iron (60W) serves as an invaluable tool within the electronics industry. This device enables users to perform soldering tasks with adjustable temperature settings ranging from 100°C to 450°C, achieved through a precision control knob. It is equipped with interchangeable, iron-plated tips, rendering it highly versatile for both electronic and electrical applications. The soldering station is designed to provide an efficient and user-friendly experience, ensuring optimal performance for a variety of soldering needs.
₵50.00 -
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor a lot more corrosion-resistant and therefore lasts longer.
Specifications:
- Input voltage: 3VDC via a CR2032 button-cell battery (Note: the battery is not included, but is sold separately)
- Size: 140x15mm
₵50.00 -
This is a High-Quality generic 12V 6A Switching Power Supply Module. The module works with an input voltage range of 110-245VAC and gives a constant output of 12V with a current of up to 6A. This board can be used as a battery charge for 12V lead-acid batteries, which requires a constant voltage, the constant current method for the charging purpose.
₵90.00 -
The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.
₵80.00 -
Solar panels are a clean and ecological source of electricity. Obtaining this energy, however, poses several challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency
The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers and also to store energy produced excessively for later use
The SCC-30A-PWM-LCD solar charge controller allows you to connect panels both in series and in parallel – remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.
₵90.00
Reviews
There are no reviews yet.