- Recent add item
-
×
Out Of Stock
Mini Solar Panel 9V 2 Watt 2 W Solar Cells
₵120.00
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
Out of stock
Description
Solar panels have become a favoured and eco-friendly option for various electronic projects. Portable and lightweight solar cells can turn sunlight into electricity, providing a green and easily accessible energy source for outdoor projects. This larger 9V 2-watt solar panel is ideal for medium-sized projects and solar-powered applications. These small panels can be used like tiles to form larger arrays in situations where a larger panel may not fit or conform to uneven surfaces or structures.
Each solar panel generates roughly 220mA @ 9V and measures 115 x 115mm. The outer surface is a hard plastic coating while the backing is a hard PCB material. Wires can be soldered to the back of the panel with ease!
Features
- Output Voltage: 9V
- Dimensions: 115 x 115mm
- Output Rating: 2 Watts
- Output Current: ~220mA
- Thickness: 2.75mm
Related products
-
This is a High-Quality generic 12V 6A Switching Power Supply Module. The module works with an input voltage range of 110-245VAC and gives a constant output of 12V with a current of up to 6A. This board can be used as a battery charge for 12V lead-acid batteries, which requires a constant voltage, the constant current method for the charging purpose.
₵90.00 -
Solar panels are a clean and ecological source of electricity. Obtaining this energy, however, poses several challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency
The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers and also to store energy produced excessively for later use
The SCC-30A-PWM-LCD solar charge controller allows you to connect panels both in series and in parallel – remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.
₵90.00 -
This NodeMCU ESP8266 Expansion Base Board is an expansion board designed to work with the NodeMCU V3 ESP8266 ESP-12E. Powered by 6V to 24V DC input, it provides the support power to operate the NodeMCU V3 and offers easy connection to all of its input and output pins to help you connect your NodeMCU board to other devices.
Features:
₵150.00 -
The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.
₵80.00 -
₵12.00 -
The Nema 17 stepper motor boasts a compact and robust design, with an end face size measuring 1.7 inches by 1.7 inches. Known for its versatility, it is available in both single-shaft and dual-shaft configurations, making it suitable for a variety of applications. This motor operates with a precise step angle of 1.8°, translating to an impressive 200 steps per revolution, which allows for smooth and accurate movements.
Each phase of the NEMA 17 motor draws 1.2 A at 4 V, delivering a reliable holding torque of 3.2 kg-cm. This characteristic makes it ideal for demanding tasks where consistent positioning is essential. The Nema 17 stepper motor is widely utilized in numerous applications, including 3D printers, CNC machines, and laser cutters, where its precision and torque capabilities can significantly enhance performance and efficiency.
₵145.00
Reviews
There are no reviews yet.