i2c Logic Level bi-directional Converter module

8.00

In Stock

If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel.

15 in stock

Compare

Description

Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
The level converter is very easy to use. The board needs to be powered from the two voltage sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.

IIC I2C Level Translation Module 5-3v system is compatible. Can be used with our shop module

SPECs:

AVCC 5V system power supply

ASCL connected 5V system SCL

ASDA connected 5V system SDA

AGND connected 5V system GND

BVCC then 3V system power supply

BSCL connected to 3V system SCL

BSDA connects 3V system SDA

BGND connected to 3V system GND

Reviews

There are no reviews yet.

Be the first to review “i2c Logic Level bi-directional Converter module”

Your email address will not be published.