Description
- Size: 58 × 63 × 16 mm
- Cells: 4 AA
This battery holder features two 6″, 24-gauge leads that have approximately 5 mm of insulation stripped off of the ends. The red wire connects to the positive end of the batteries and the black wire connects to the negative end of the batteries.
Related products
-
₵250.00 -
This is a High-Quality generic 12V 6A Switching Power Supply Module. The module works with an input voltage range of 110-245VAC and gives a constant output of 12V with a current of up to 6A. This board can be used as a battery charge for 12V lead-acid batteries, which requires a constant voltage, the constant current method for the charging purpose.
₵90.00 -
The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.
₵80.00 -
₵15.00 -
₵20.00 -
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
₵120.00
Reviews
There are no reviews yet.