New
NEMA 17 Stepper Motor – 34mm Length, 1.5A with 720mm Cable
₵145.00
In StockThe Nema 17 stepper motor boasts a compact and robust design, with an end face size measuring 1.7 inches by 1.7 inches. Known for its versatility, it is available in both single-shaft and dual-shaft configurations, making it suitable for a variety of applications. This motor operates with a precise step angle of 1.8°, translating to an impressive 200 steps per revolution, which allows for smooth and accurate movements.
Each phase of the NEMA 17 motor draws 1.2 A at 4 V, delivering a reliable holding torque of 3.2 kg-cm. This characteristic makes it ideal for demanding tasks where consistent positioning is essential. The Nema 17 stepper motor is widely utilized in numerous applications, including 3D printers, CNC machines, and laser cutters, where its precision and torque capabilities can significantly enhance performance and efficiency.
9 in stock
Description
Pin Mode
| NO. | Pin Name | WireColour | Description |
| 1 | Coil 1 | Black | This motor has six wires, connected to two split windings. Black, Yellow, and Green wires are part of the first winding while Red, White and Blue are part of the second winding. |
| 2 | Coil 2 | Yellow | |
| 3 | Coil 3 | Green | |
| 4 | Coil 4 | Red | |
| 5 | Coil 5 | White | |
| 6 | Coil 6 | Blue |
Technical Specifications
- Rated Voltage: 12V DC
- Current: 1.2A at 4V
- Step Angle: 1.8 deg.
- No. of Phases: 4
- Motor Length: 1.54 inches
- 4-wire, 8 inch lead
- 200 steps per revolution, 1.8 degrees
- Operating Temperature: -10 to 40 °C
- Unipolar Holding Torque: 22.2 oz-in
Related products
-
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor a lot more corrosion-resistant and therefore lasts longer.
Specifications:
- Input voltage: 3VDC via a CR2032 button-cell battery (Note: the battery is not included, but is sold separately)
- Size: 140x15mm
₵50.00 -
- High-Quality Motor Driver: The HANPOSE HPD970 Motor Driver Board is a high-quality product designed for 3D printer enthusiasts and professionals, ensuring reliable automation control and precise motor operation.
- Wide Voltage Compatibility: This motor driver board operates within a wide voltage range of 24-110VDC, catering to various user preferences, including the user’s input of a specific voltage requirement.
- Certified and Reliable: The product is certified with 3C, ensuring compliance with industry standards and guaranteeing a safe and efficient operation.
- Compatibility with Nema 23 Stepper Motors: The HANPOSE HPD970 Motor Driver Board is specifically designed for use with Nema 23 stepper motors, making it an ideal choice for users working with this type of motor, such as the user who requires a driver for their Nema 23 stepper motor.
₵175.00 -
The YF-S201C Water Flow Sensor is meticulously designed to offer precise and reliable flow measurements across a diverse range of applications. This G1/2 flowmeter is particularly suited for monitoring water flow in industrial, agricultural, and home automation systems. Its elegant black design, combined with robust construction, guarantees both durability and consistent performance over time.
₵70.00 -
Solar panels are a clean and ecological source of electricity. Obtaining this energy, however, poses several challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency
The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers and also to store energy produced excessively for later use
The SCC-30A-PWM-LCD solar charge controller allows you to connect panels both in series and in parallel – remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.
₵90.00 -
Brand Manufacturer CHINA Country of Origin China Colour black Number of Memory Sticks 1 Item Weight 191 g Package Dimensions 21.79 x 11.61 x 6 cm; 191 g Item part number GJHYGHJ2 Are batteries included? No ₵75.00 -
This approach is highly advantageous for the development of prototype electronic devices. It enhances the visual appeal of your hardware project, providing a more polished and professional look in comparison to traditional single-sided perforated circuit boards.
₵15.00
Reviews
There are no reviews yet.