New
DIY Automatic Watering Irrigation System Soil Moisture Sensor Pump Module Kit
₵110.00
In StockDescription
It can be helpful to water houseplants or monitor soil moisture in your garden. If the soil dries out, the sensor senses low humidity and automatically turns on the pump to supply water to the plants.
Capacitive Soil Moisture Sensor
Chip model: TL555C
Operating voltage: 3.3 5.5 VDC ;Output voltage: 0 3.0 VDC ;
Interface: PH2.54-3P ;Size: 98 x 23mm (LxW) ;
Pin: Analog signal output, GND, VCC 1 Channel 5V Relay
Module:
VCC: Connect 5V Positive Pole Power Supply;
GND: Connect 5V Negative Pole Power Supply;
Mini Water Pump:
DC Voltage: 3-5 V Outside
diameter of water outlet: 0.29″/7.5mm Inside ;diameter of water outlet: 0.17″/4.5mm;
Water inlet diameter: 0.19″/5mm
Vinyl Tubing:
Size: 0.22″/5.54mm;O.D. Size: 0.32″/8.20mm;Length: 39.37inch/100cm;
Package
1xRelay module
1xMini water pump
1xPlastic Battery Storage Case Holder
1xUSB power cable
10xJumper wires
1×0.5m Vinyl Tubing
1xSoil Moisture Detector Module
Simple sensors, based on soil moisture monitoring, water your plants.
Rated voltage :DC3V or 4.5V;No-load drainage capacity :100L/H;Load rated current :0.18A;Operating voltage 3.3 ~ 5.5VDC, output voltage 0 ~ 3.0VDC;
Interface :PH2.54-3P;Pin: analog signal output, GND, VCC;
Suitable for lawn irrigation, garden, vegetable irrigation, roof cooling, flower bed, plant greenhouse and so on.
The sensor measures the soil moisture and the surrounding air, making the data you get more accurate.
Related products
-
- High-Quality Motor Driver: The HANPOSE HPD970 Motor Driver Board is a high-quality product designed for 3D printer enthusiasts and professionals, ensuring reliable automation control and precise motor operation.
- Wide Voltage Compatibility: This motor driver board operates within a wide voltage range of 24-110VDC, catering to various user preferences, including the user’s input of a specific voltage requirement.
- Certified and Reliable: The product is certified with 3C, ensuring compliance with industry standards and guaranteeing a safe and efficient operation.
- Compatibility with Nema 23 Stepper Motors: The HANPOSE HPD970 Motor Driver Board is specifically designed for use with Nema 23 stepper motors, making it an ideal choice for users working with this type of motor, such as the user who requires a driver for their Nema 23 stepper motor.
₵175.00 -
This approach is highly advantageous for the development of prototype electronic devices. It enhances the visual appeal of your hardware project, providing a more polished and professional look in comparison to traditional single-sided perforated circuit boards.
₵15.00 -
The Nema 17 stepper motor boasts a compact and robust design, with an end face size measuring 1.7 inches by 1.7 inches. Known for its versatility, it is available in both single-shaft and dual-shaft configurations, making it suitable for a variety of applications. This motor operates with a precise step angle of 1.8°, translating to an impressive 200 steps per revolution, which allows for smooth and accurate movements.
Each phase of the NEMA 17 motor draws 1.2 A at 4 V, delivering a reliable holding torque of 3.2 kg-cm. This characteristic makes it ideal for demanding tasks where consistent positioning is essential. The Nema 17 stepper motor is widely utilized in numerous applications, including 3D printers, CNC machines, and laser cutters, where its precision and torque capabilities can significantly enhance performance and efficiency.
₵145.00 -
This turbidity sensor module is a specialized electronic monitoring device engineered for compatibility with various microcontroller platforms, including Arduino, Raspberry Pi, PIC, ARM, and AVR.
The Arduino Turbidity Sensor is a highly effective tool for assessing and verifying water quality through the measurement of turbidity. This sensor provides results via both digital and analog signals, which can be obtained through the designated pins on the accompanying electronic module. This functionality allows for accurate monitoring of water clarity, making it an essential instrument in various environmental applications.
₵145.00 -
The YF-S201C Water Flow Sensor is meticulously designed to offer precise and reliable flow measurements across a diverse range of applications. This G1/2 flowmeter is particularly suited for monitoring water flow in industrial, agricultural, and home automation systems. Its elegant black design, combined with robust construction, guarantees both durability and consistent performance over time.
₵75.00 -
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
₵120.00
Reviews
There are no reviews yet.