-
This Sonoff Dual is a 1-channel WiFi wireless switch that can connect and control one home appliance and electrical device. this device Enables remote control of home appliances through the mobile application. the Sonoff Basic switch’s advantages such as easy installation and operation, quick WiFi access, and APP remote control.
₵180.00 -
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor a lot more corrosion-resistant and therefore lasts longer.
Specifications:
- Input voltage: 3VDC via a CR2032 button-cell battery (Note: the battery is not included, but is sold separately)
- Size: 140x15mm
₵50.00 -
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
₵150.00 -
-
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵370.00 -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵370.00 -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵370.00 -
- The instrument is a pocket digital multimeter, which is used to measure DCV, ACV, and DCA, resistance, diode and continuity test. It is an ideal tool for labs, household and wireless enthusiasts.
₵80.00 -
Overview
- This chassis kit contains all the parts necessary for robotics projects.
- It is perfect for prototyping and hobbyists. Operates from 3V to 6V DC for the geared motors. The best part of this kit is how easy it is to put all the pieces together.
- The chassis kit is suitable for projects such as line-following, obstacle avoidance, and distance-measuring robots.
Original price was: ₵130.00.₵120.00Current price is: ₵120.00. -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵370.00 -
₵12.00 -
This NodeMCU ESP8266 Expansion Base Board is an expansion board designed to work with the NodeMCU V3 ESP8266 ESP-12E. Powered by 6V to 24V DC input, it provides the support power to operate the NodeMCU V3 and offers easy connection to all of its input and output pins to help you connect your NodeMCU board to other devices.
Features:
₵150.00
