-
₵50.00 -
₵12.00
-
₵10.00
-
₵12.00 -
₵35.00 -
₵35.00 -
₵60.00 -
About this item
- EXCEPTIONAL PRINT QUALITY: Achieve high-resolution prints with a precision nozzle that ensures detailed and smooth models with printing accuracy up to ±0.1mm, ideal for prototyping and sample creation.
- LARGE BUILD VOLUME: Offers a generous build space of 220 x 220 x 250 mm, perfect for creating medium-sized prototypes, small batches, or detailed parts for molding and sample applications.
- RAPID HEATING BUILD PLATE: The heated bed reaches operating temperatures (up to 110°C) in just five minutes, ensuring strong adhesion and reducing material warping, making it suitable for various filament types.
- RESUME PRINTING FUNCTION: Safeguard your printing projects with power recovery mode that resumes printing from the last recorded position after a power interruption, reducing the risk of print failure.
- ADVANCED EXTRUDER TECHNOLOGY: The upgraded extruder minimizes the risk of clogging and ensures consistent filament extrusion, enhancing the overall print quality and making it ideal for mold sample printing.
Original price was: ₵5,990.00.₵5,500.00Current price is: ₵5,500.00. -
This BMS balance board is designed for a lithium battery pack to equalize voltage and protect the cells. This module monitors and protects the charging and discharging processes of the cells, balances them, and serves as a low-voltage and over-charge cut-off.
Original price was: ₵95.00.₵85.00Current price is: ₵85.00. -
This is a High-Quality generic 12V 6A Switching Power Supply Module. The module works with an input voltage range of 110-245VAC and gives a constant output of 12V with a current of up to 6A. This board can be used as a battery charge for 12V lead-acid batteries, which requires a constant voltage, the constant current method for the charging purpose.
₵90.00 -
The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.
₵80.00 -
Power Bank Circuit with LCD Display Dual USB 5V 2.1A 1A module for creating a power bank for one Li-ion battery 1S (3.7 V) with LCD. It supports dual-USB technology, which allows you to connect two gadgets to USB ports at once and charge them at the same time.
₵100.00 -
This approach is highly advantageous for the development of prototype electronic devices. It enhances the visual appeal of your hardware project, providing a more polished and professional look in comparison to traditional single-sided perforated circuit boards.
₵15.00 -
The YF-S201C Water Flow Sensor is meticulously designed to offer precise and reliable flow measurements across a diverse range of applications. This G1/2 flowmeter is particularly suited for monitoring water flow in industrial, agricultural, and home automation systems. Its elegant black design, combined with robust construction, guarantees both durability and consistent performance over time.
₵75.00 -
The High-Quality Adjustable Temperature Straight Plug Soldering Iron (60W) serves as an invaluable tool within the electronics industry. This device enables users to perform soldering tasks with adjustable temperature settings ranging from 100°C to 450°C, achieved through a precision control knob. It is equipped with interchangeable, iron-plated tips, rendering it highly versatile for both electronic and electrical applications. The soldering station is designed to provide an efficient and user-friendly experience, ensuring optimal performance for a variety of soldering needs.
₵90.00 -
This turbidity sensor module is a specialized electronic monitoring device engineered for compatibility with various microcontroller platforms, including Arduino, Raspberry Pi, PIC, ARM, and AVR.
The Arduino Turbidity Sensor is a highly effective tool for assessing and verifying water quality through the measurement of turbidity. This sensor provides results via both digital and analog signals, which can be obtained through the designated pins on the accompanying electronic module. This functionality allows for accurate monitoring of water clarity, making it an essential instrument in various environmental applications.
₵145.00 -
The Nema 17 stepper motor boasts a compact and robust design, with an end face size measuring 1.7 inches by 1.7 inches. Known for its versatility, it is available in both single-shaft and dual-shaft configurations, making it suitable for a variety of applications. This motor operates with a precise step angle of 1.8°, translating to an impressive 200 steps per revolution, which allows for smooth and accurate movements.
Each phase of the NEMA 17 motor draws 1.2 A at 4 V, delivering a reliable holding torque of 3.2 kg-cm. This characteristic makes it ideal for demanding tasks where consistent positioning is essential. The Nema 17 stepper motor is widely utilized in numerous applications, including 3D printers, CNC machines, and laser cutters, where its precision and torque capabilities can significantly enhance performance and efficiency.
₵145.00 -
- High-Quality Motor Driver: The HANPOSE HPD970 Motor Driver Board is a high-quality product designed for 3D printer enthusiasts and professionals, ensuring reliable automation control and precise motor operation.
- Wide Voltage Compatibility: This motor driver board operates within a wide voltage range of 24-110VDC, catering to various user preferences, including the user’s input of a specific voltage requirement.
- Certified and Reliable: The product is certified with 3C, ensuring compliance with industry standards and guaranteeing a safe and efficient operation.
- Compatibility with Nema 23 Stepper Motors: The HANPOSE HPD970 Motor Driver Board is specifically designed for use with Nema 23 stepper motors, making it an ideal choice for users working with this type of motor, such as the user who requires a driver for their Nema 23 stepper motor.
₵175.00 -
Brand Manufacturer ‎CHINA Country of Origin ‎China Colour ‎black Number of Memory Sticks ‎1 Item Weight ‎191 g Package Dimensions ‎21.79 x 11.61 x 6 cm; 191 g Item part number ‎GJHYGHJ2 Are batteries included? ‎No ₵75.00 -
Solar panels are a clean and ecological source of electricity. Obtaining this energy, however, poses several challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency
The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers and also to store energy produced excessively for later use
The SCC-30A-PWM-LCD solar charge controller allows you to connect panels both in series and in parallel – remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.
₵210.00 -
Number of Batteries ‎3 LR44 batteries required. Control Method ‎Touch Noise Level ‎120 dB Mounting Type ‎Window Mount Sensor Technology ‎Contact Sensor Manufacturer ‎Rmweify Part Number ‎WT8 Item Weight ‎9.9 ounces Product Dimensions ‎3.15 x 1.97 x 1.97 inches Country of Origin ‎China Item model number ‎WT8 Batteries ‎3 LR44 batteries required. Included Components ‎Batteries Batteries Included? ‎No Batteries Required? ‎No Description Pile ‎Alkaline ₵45.00 -
This Sonoff Dual is a 1-channel WiFi wireless switch that can connect and control one home appliance and electrical device. this device Enables remote control of home appliances through the mobile application. the Sonoff Basic switch’s advantages such as easy installation and operation, quick WiFi access, and APP remote control.
₵180.00 -
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor a lot more corrosion-resistant and therefore lasts longer.
Specifications:
- Input voltage: 3VDC via a CR2032 button-cell battery (Note: the battery is not included, but is sold separately)
- Size: 140x15mm
₵50.00 -
This solar panel is rated at 9V and 2 Watts. At approximately 220mA, this solar panel has plenty of current for mid-sized projects. The panel’s exterior is covered with a durable plastic layer, and a sturdy PCB material backs it. Large solder-able pads on the panel’s rear side make for easy connections!
₵120.00 -
₵250.00 -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵310.00 -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵310.00 -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵310.00 -
- The instrument is a pocket digital multimeter, which is used to measure DCV, ACV, and DCA, resistance, diode and continuity test. It is an ideal tool for labs, household and wireless enthusiasts.
₵120.00 -
Overview
- This chassis kit contains all the parts necessary for robotics projects.
- It is perfect for prototyping and hobbyists. Operates from 3V to 6V DC for the geared motors. The best part of this kit is how easy it is to put all the pieces together.
- The chassis kit is suitable for projects such as line-following, obstacle avoidance, and distance-measuring robots.
Original price was: ₵130.00.₵120.00Current price is: ₵120.00. -
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high-resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
₵310.00 -
₵14.00 -
This NodeMCU ESP8266 Expansion Base Board is an expansion board designed to work with the NodeMCU V3 ESP8266 ESP-12E. Powered by 6V to 24V DC input, it provides the support power to operate the NodeMCU V3 and offers easy connection to all of its input and output pins to help you connect your NodeMCU board to other devices.
Features:
₵100.00 -
1. With a ratchet labour-saving device, it saves effort and ensures the pressing effect. A variety of die can be selected, covering all common specifications of telephone and network cable terminals.
2. The ratchet has a locking function, which is convenient to store and has the function of stripping UTP/STP round twisted pairs.₵370.00 -
DESCRIPTION
The Traffic Light LED Module has large Red, Yellow and Green LEDs arranged in a standard traffic light pattern with built-in current limiting resistors.
PACKAGE INCLUDES:
- Traffic Light LED Module
Original price was: ₵20.00.₵15.00Current price is: ₵15.00. -
₵500.00
